How to apply your own wall vinyl decal


Brought to you by: StickON.com.sg Golden Rule: Wipe the desired surface you wish to apply your decal on with a slightly damp cloth Step #1: Decide where you wish to place your decal ensuring that the surface is clean and dry. Step #2: After deciding on the final position of the decal, tape it down on 4 corners using masking tape to hold it in place. Step #3: For larger decals add another strip of masking tape across the center of the decal. Next, remove the strips of masking tape from the top two corners. Step #4: Separate the clear application tape from the white backing by making a small incision near the edge which makes it easier to peel off (be careful not to cut the decal itself). Step #5: Slowly tear off the white backing while ensuring that the decal sticks on the clear application tape. Step #6: Use a squeegee or any card during application of the decal to the wall to ensure that no air bubbles are trapped and make application easier. Step #7: Finally, remove all the masking tape and repeat Step #4 to #6 Step #8: Now, remove all the clear application tape carefully and you are done! Share your ideas on how you use your decal. Send a picture of your new decal at designs@stickon.com.sg Brought to you by: Stick ON Vinyl Decals www.stickon.com.sg

Tags: , , ,

12 Responses to "How to apply your own wall vinyl decal"

  • jesuzizinmybedroom says:
  • rowan1802 says:
  • theweelers says:
  • wynpam22 says:
  • sherribenson1 says:
  • wynpam22 says:
  • melimited says:
  • msjuicy504 says:
  • wynpam22 says:
  • msjuicy504 says:
  • wynpam22 says:
  • ashford57 says:
Leave a Comment